
Material and Processing Technology
Base material: 6061 aluminum alloy five axis linkage integrated milling forming, machine processed bright natural color, no welding splicing; The annular deep cavity, central porous flange, side fluid step interface, and bottom positioning buckle are all processed in one go. The coaxiality and flatness tolerances of all sealing steps and threaded holes are ≤ 0.01mm.
Technological advantages
Internal multi zone sealed cavity: Separate the rubber path, gas path, and electronic component installation area without interfering with each other, and use sealing rings to achieve full cavity airtightness/liquid tightness;
Center 6-hole annular flange: used as a coaxial installation reference for the rotating spindle, micro servo motor, and rotating valve core, the six point locking force is uniform, and there is no eccentric shaking during high-speed rotation;
Outer edge stepped fluid joint sinking platform: Three specifications of stepped holes, large, medium, and small, are respectively connected to the main glue supply pipe, on/off control air source, and blowing and cleaning air;
Material advantages: Lightweight, balanced thermal conductivity, stable adhesive viscosity, resistant to industrial media corrosion such as UV glue, solder paste, red glue, etc. The integrated structure has strong pressure resistance and is not easily deformed or leaked during long-term rotation and reciprocating.


Structural Function
1. Center six hole coaxial installation flange
The central large hole is a passage for the rotating valve core and the main shaft to pass through; Lock the rotating valve body and servo rotary motor around 6 threaded holes to ensure that the rotation center is coaxial with the dispensing nozzle, achieving 360 ° rotation for dispensing (for circular workpieces and circular adhesive path operations).
2. Internal partition annular deep cavity
The cavity is divided into independent areas by ribs:
Fluid zone: pre embedded cross communication channels, distributing multiple adhesives and driving air pressure;
Electrical installation area: left square multi threaded protrusion, fixed rotary encoder, limit sensor, and drive small board;
The annular groove is embedded in the entire sealing rubber ring to isolate dust and glue mist from infiltrating the internal rotating mechanism.
3. Three sets of stepped fluid interfaces on the outer edge
Top large hole: inlet of main adhesive supply pipeline; Small holes on both sides: Two independent control air sources (valve opening and closing driving air); External pressure regulating valve and pressure sensor can be connected to monitor the adhesive pressure inside the chamber in real time.
4. Bottom multi slot positioning lug
The circular distribution of protruding buckle slots precisely engages with the rotating worktable and cantilever base of the equipment, and is locked with side countersunk screws for quick disassembly and high repeatability positioning accuracy.

Core applications
1. 360 ° rotating precision dispensing machine integrated chassis
2. Micro rotating atomizing spray valve base
3. Semiconductor wafer rotary injection valve base
Hot Tags: rotary valve main base, China rotary valve main base manufacturers, suppliers, factory, Camera Tilting Bracket, electronic information equipment components, Laser Heat Sink Bracket, Multi channel Circular Aluminum Alloy Cavity, Radio Casing, Rotary Valve Main Base
