Product design of the flywheel housing

Jul 16, 2026

Leave a message

The quick-release flywheel housing features reinforcing ribs at each threaded fastening hole; these ribs form a mesh-like structure, with one or two ribs supporting each hole. A main shaft bore is located at the center of the housing, and a cooling fluid injection port is positioned on one side. The main body of the housing is made of aluminum alloy and features an anti-rust, corrosion-resistant coating. Components such as the reinforced flywheel housing, exhaust pipe, ribbed oil pan, and rust-resistant air tank further enhance the vehicle's durability. A removable bottom section is installed at the base of the flywheel housing to facilitate the disassembly and assembly of the flywheel and clutch assembly, as well as clutch adjustments.

 

Installation of the flywheel housing follows a core process of "cleaning and inspection-precise positioning-standardized fastening-accuracy verification." First, the housing must be inspected for damage and verified as compatible with the engine; the mating surfaces of the cylinder block's rear face and the flywheel housing must be cleaned of debris and oil. Next, the positioning holes of the cylinder block and flywheel housing are aligned, and two locating pins are used for initial positioning. Bolts or nuts must be tightened using a cross-pattern sequence, and accuracy verification requires the use of professional measuring tools to check for coaxiality and perpendicularity.

The sealing design for the engine flywheel housing comprises a main housing with a protrusion at the top containing a groove. A side plate is attached to the housing's surface, featuring a mounting block at its top that houses a sealing sleeve. A sealing groove is located at the bottom of the housing and contains a sealing plug; this improved design effectively prevents fluid leakage.

Send Inquiry
Send Inquiry