Adjusting the automatic feed on a manual lathe involves three core steps: Selecting the direction, setting the speed, and engaging the mechanism. While specific operations vary by machine model, the fundamental principles remain the same.

Selecting the Feed Direction
Determine the tool post's movement direction using the selector lever on the control panel or feed box. Longitudinal feed (parallel to the workpiece axis) is used for turning external diameters or internal bores, while transverse feed (perpendicular to the workpiece axis) is used for facing operations.
Determining the Feed Rate
Adjust the feed box gear-shift lever to change the gear ratio; the feed rate is typically measured in mm/rev (the distance the tool post moves per spindle revolution). Select an appropriate value based on material hardness, tool type, and machining precision requirements, referring to the feed box dial or the machine manual for specific parameters.
Engaging Automatic Feed
Longitudinal feed: Move the split-nut lever to engage the lead screw with the split nut; the rotation of the spindle then drives the longitudinal movement of the tool post.
Transverse feed: Move the transverse automatic feed lever to engage the drive train and initiate automatic transverse cutting.
Ensure the machine has come to a complete stop before making adjustments, and perform a low-speed test run afterward to verify the direction and speed. In an emergency, immediately return the lever to its neutral position or disengage the split nut to stop the feed.
