Engine Stand Brackets

Engine Stand Brackets

The housing is machined from 6061-T6 aviation-grade aluminum alloy as the standard option. For heavy-load conditions, we offer 7075 aluminum as an upgrade. This material selection balances weight reduction, machinability, and structural strength, making it suitable for both power and hydraulic components.
Share to
Send Inquiry
Description
Technical Parameters
 
 
Manufacturing Process

The housing is machined as a single piece using five-axis CNC milling, with no casting or welding involved:

3af51786d80d005484a73cd2b17450d5

Inner and outer cavities, flange mounting surfaces, oil passage holes, positioning protrusions, and cooling ribs are all milled in one setup.

5cd06454b16925d5d956de1205ed01b1

The surface retains a clean, concentric circular machining pattern. We do not polish the surface; only deburring and ultrasonic degreasing are performed.

10ae620f1bb38b9feba374f6016bbe61

All hole features including flange threaded holes, locating pin holes, oil passages, and sealing grooves are machined to a tolerance within ±0.02mm.

70c22138118811c148ca6253572adb98

Sealing grooves are cut along the internal cavity edges for O-ring installation, enabling hydraulic or oil-air sealing.

Structural Design Highlights

 
 
01
 

External cooling ribs: Increase heat dissipation area and help keep internal hydraulic oil and motor operating temperatures stable.

Composite internal cavities: Divided compartments separate the oil circuit, motor mounting area, and valve body assembly zone.

 
02
 

Multi-directional flange interfaces: Side oil ports, end-face mounting flanges, and top sealing flanges allow connection to multiple pipelines.

Rounded internal corners: Applied throughout to reduce stress concentration and lower the risk of cracking under pressure.

d946318393ec9f1d49fcaf0892938bba

 

 

Structural Zones
 

Right Main Sealing Chamber

The large opening on the right side houses the motor or valve body assembly. Multiple layers of threaded positioning holes and an outer annular sealing groove are provided for O-ring installation to maintain high-pressure sealing.

Left Oil Circuit Flange

The central large hole serves as the main oil inlet and outlet. Threaded holes on both sides connect to external hydraulic lines. The vertical cooling ribs on the outer surface help dissipate heat from the internal oil chamber.

Top Actuator Mounting Area

The polygonal motor cylinder mount accommodates the drive motor internally. The square opening on the side allows wiring harness routing, with four fixing screw holes around it for securing the motor cover plate.

Bottom Universal Mounting Flange

The multi-point mounting base includes threaded fixing holes for securing the complete housing assembly to the frame or equipment base.

 

Application Scenarios

Core application: Electric-hydraulic actuator housing for automotive and motorcycle applications, specifically electronic hydraulic pump and valve body assemblies.

Motorcycle Applications

Suitable for modified hydraulic clutch systems and electronic throttle pump bodies. The housing integrates the oil chamber, drive motor, and oil passages in one unit, replacing the original cast iron pump assembly. Benefits include reduced weight and improved heat dissipation, making it a preferred choice for high-performance aftermarket CNC components.

 

Automotive Applications

Used in electronic brake systems and steering assist hydraulic valve body housings. It serves as the main structural housing for EHB (electronic hydraulic brake) and electric power steering units, integrating the motor, oil circuit, and pressure chamber.

 

Small Construction Equipment

Applied in micro hydraulic power units for small machinery. The housing functions as the pump body for micro hydraulic stations, integrating the motor, oil circuit, and oil reservoir chamber for automation equipment and compact agricultural machinery.

 

 

Comparison with Original Cast Iron Housings

 

Aspect

CNC-Machined Aluminum Housing

Cast Iron Housing

Weight

40%–60% lighter, reducing unsprung mass

Heavier, affects overall vehicle dynamics

Sealing reliability

Integrated milling ensures consistent sealing; no porosity issues

Castings may have sand holes and leak risks

Heat dissipation

Cooling rib design offers efficient thermal management

Lower heat dissipation efficiency

Appearance

Machined texture, preferred in the performance aftermarket

Standard industrial finish

Customization

Cavity volumes and port positions can be adjusted per application requirements

Limited to original design parameters

 

Post-Processing Options

 

Option

Description

Best Suited For

As-machined

Oil and burrs removed only; milling pattern retained. Lowest cost option.

Short-term or prototype use

Natural anodizing

Forms a dense oxide layer; rust and wear resistant. Retains a matte metal finish.

General use requiring corrosion protection

Hard anodizing

Increases surface hardness to HV400 or higher.

High-pressure or high-wear applications

 

modular-1
Customization and Ordering Information

These housings are non-standard, custom-machined components. We provide CNC sampling and production services based on customer drawings. For inquiries, technical discussions, or to submit your drawings for a quote, please contact our engineering team.

 

Hot Tags: engine stand brackets, China engine stand brackets manufacturers, suppliers, factory, auto parts, Car Modification Adapter Board, Car Seat Foot Adjuster, Engine Stand Brackets, Motor Bearing End Cover, Pressure Injection Housing

Send Inquiry
Send Inquiry